Paper
2 May 2011 Design a linear irregular Fresnel lens to thin an LED-based direct-type backlight module and improve the illuminance and uniformity of LCD panel
Author Affiliations +
Abstract
We propose a Linear Irregular Fresnel Lens (denoted as LIFL) to replace the diffusion sheet and prism sheet in a rectangular LED-based Direct-type Backlight Module. The aim is to improve the illuminance and uniformity of LCD panel, as well as to reduce the cost of Backlight Module and make the Module thin. Here "Linear" means the grooves of a Fresnel lens are arranged linearly and "irregular" means that the sequence of all groove angles is not increasing or decreasing. To let the designed LIFL possess good effects of light ray guiding, two layers of LIFLs are needed. The first layer LIFL consists of x-axis grooves, whereas the second layer LIFL consists of y-axis grooves to guide all light rays guided by the first layer LIFL. The groove angles of the designed LIFL are evolved by a Genetic Algorithm which is developed in terms of the performance requirement on illuminance and uniformity of LCD panel in a rectangular LED-based Direct-type Backlight Module. In this paper, we will simulate a simple fifteen-LED Direct-type Backlight Module to demonstrate the performances on illuminance and uniformity of the designed LIFL.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wen-Gong Chen "Design a linear irregular Fresnel lens to thin an LED-based direct-type backlight module and improve the illuminance and uniformity of LCD panel", Proc. SPIE 8065, SPIE Eco-Photonics 2011: Sustainable Design, Manufacturing, and Engineering Workforce Education for a Green Future, 806504 (2 May 2011); https://doi.org/10.1117/12.882696
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
LCDs

Fresnel lenses

Light emitting diodes

Genetic algorithms

Algorithm development

Light sources

Gallium

RELATED CONTENT

Novel concept for large area light sources cavity lit...
Proceedings of SPIE (August 16 2002)
LED-driven backlights for automotive displays
Proceedings of SPIE (September 28 2007)
An integrated LED reflector for backlight system
Proceedings of SPIE (September 02 2008)
A new design mixing RGB LED (red, green, blue light...
Proceedings of SPIE (September 12 2006)
Optimal design of Fresnel lens for a reading light system...
Proceedings of SPIE (September 21 2006)

Back to Top