Paper
17 May 2011 Energy harvesting from mortar tube firing impulse to supplement fire-control electronics battery
Author Affiliations +
Abstract
Novel designs are presented for piezoelectric-based energy-harvesting power sources that are attached to mortar tubes to harvest energy from the firing impulse. The power sources generate electrical energy by storing mechanical potential energy in spring elements during the firing. The mass-spring unit of the power source begins to vibrate after firing, thereby applying a cyclic force to a set of piezoelectric elements to which it is attached. The mechanical energy of vibration is thereby converted to electrical energy over a relatively long period of time and stored in electrical energy storage elements such as capacitors. The power sources are shown to provide a significant portion of the required electrical energy of the fire control system.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Rastegar, R. Murray, R. Tillinghast, C. Pereira, and H.-L. Nguyen "Energy harvesting from mortar tube firing impulse to supplement fire-control electronics battery", Proc. SPIE 8035, Energy Harvesting and Storage: Materials, Devices, and Applications II, 803516 (17 May 2011); https://doi.org/10.1117/12.883433
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Energy harvesting

Electronics

Weapons

Energy efficiency

Control systems

Chemical elements

Prototyping

Back to Top