Accuracy of diffraction-based and image-based overlay

Chih-Ming Ke; Guo-Tsai Huang; Jacky Huang; Rita Lee

doi:10.1117/12.880037

20 April 2011 Accuracy of diffraction-based and image-based overlay

Chih-Ming Ke, Guo-Tsai Huang, Jacky Huang, Rita Lee

Proceedings Volume 7971, Metrology, Inspection, and Process Control for Microlithography XXV; 79711E (2011) https://doi.org/10.1117/12.880037
Event: SPIE Advanced Lithography, 2011, San Jose, California, United States

Abstract

There is no overlay standard in the world. For critical dimension (CD), we may use the VLSI standard or programmed pitch offsets to determine the CD accuracy or CD sensitivity. Programmed overlay offsets can provide relatively accurate sub-nanometer level overlay splits but it is only on a single layer and does not contain layer-to-layer process variations. The splits of scanner magnification can check the trend of overlay sensitivity but it cannot provide the exact value of overlay offsets. Transmission electron microscopes (TEM) can be used as a final overly error verification tool. However, TEM sample preparation for after-development-inspection (ADI) will introduce even more sample distortion errors. Therefore, unlike CD metrology, there is no clean and systematic way to verify the accuracy of overlay metrology. These technical barriers necessitate matching diffraction-based overlay and image-based overlay, especially for sub-nanometer point-to-point matching requirement. In this paper, we compare the correlation of ADI to after-etch-inspection (AEI) by using image-based box-in-box overlay measurement and diffraction-based overlay measurement on the same wafer. The ADI-to-AEI overlay data consistency plays a key role for lithography overlay APC success and AEI overlay should be treated as the final standard for overlay accuracy. We found that process-induced asymmetric profiles of overlay marks will lead to ADI-to-AEI overlay bias. This bias is proportional to the degree of profile asymmetry and different color/wavelength have different sensitivity to this ADI-to-AEI bias. Our experimental results show that the ADI-to-AEI overlay data bias can indeed be significantly improved by selecting the color/wavelength with minimum sensitivity to the asymmetry profile. These results make us believe that overlay metrology recipe setup is quite critical no matter for image-based overlay or diffraction-based overlay. Otherwise, problematic overlay data will be taken into APC feedback loop and lead to wrong overlay correction.

Citation Download Citation

Chih-Ming Ke, Guo-Tsai Huang, Jacky Huang, and Rita Lee "Accuracy of diffraction-based and image-based overlay", Proc. SPIE 7971, Metrology, Inspection, and Process Control for Microlithography XXV, 79711E (20 April 2011); https://doi.org/10.1117/12.880037

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available