Paper
10 February 2011 Distribution of photodarkening-induced loss in Yb-doped fiber amplifiers
Michalis N. Zervas, Fabio Ghiringhelli, Michael K. Durkin, Ian Crowe
Author Affiliations +
Abstract
Photodarkening-induced output power degradations and long-term stability in high power pulsed and CW fiber laser MOPA systems are discussed. The studied laser systems are based on aluminosilicate single-mode Yb-doped fibers and use the GTWave fiber technology for cladding pumping. The active fiber lengths are between 10-30m. We have tested Yb-doped fiber amplifiers operated under both pulsed and CW mode. Using OTDR background-loss measurements we show, for the first time, that the photodarkening-induced loss is non-uniformly distributed along the length of the active fiber. By calculating the average inversion along the fiber length, we show that the induced loss follows closely an Yb-inversion dependence to the power of 2. In addition we have studied the temperature dependence of the output power variation. It is shown that increasing (decreasing) operating temperature results in decrease (increase) of the laser output power, reaching the new equilibria over time scales of ~200hours. We also present data on the non-photodarkening SPI fiber which is used in all SPI products.
© (2011) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michalis N. Zervas, Fabio Ghiringhelli, Michael K. Durkin, and Ian Crowe "Distribution of photodarkening-induced loss in Yb-doped fiber amplifiers", Proc. SPIE 7914, Fiber Lasers VIII: Technology, Systems, and Applications, 79140L (10 February 2011); https://doi.org/10.1117/12.877868
Lens.org Logo
CITATIONS
Cited by 15 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Amplifiers

Fiber amplifiers

Fiber lasers

Ytterbium

Laser systems engineering

Continuous wave operation

Signal attenuation

RELATED CONTENT


Back to Top