Redesign of the image processing techniques used for the alignment of the LMJ beams transportation section

Laurent Hilsz; Jean-Christophe Benoit; Florence Poutriquet; Olivier Bach; Frédéric Nicaise; Alain Adolf

doi:10.1117/12.859669

7 September 2010 Redesign of the image processing techniques used for the alignment of the LMJ beams transportation section

Laurent Hilsz, Jean-Christophe Benoit, Florence Poutriquet, Olivier Bach, Frédéric Nicaise, Alain Adolf

Author Affiliations +

Proceedings Volume 7797, Optics and Photonics for Information Processing IV; 77970D (2010) https://doi.org/10.1117/12.859669
Event: SPIE Optical Engineering + Applications, 2010, San Diego, California, United States

Abstract

The Megajoule laser (LMJ) project was launched in 1995 by the French Atomic Energy Commission and is aimed at developing a facility to achieve inertial confinement fusion. The LMJ architecture is based on 176 laser beamlines. To provide these 176 high-powered beams when required for subsequent operations, one of the main issues consists of aligning reliably the laser Transportation Section (TS) not only during the normal operation of the installation but also during the power rising of each laser chain, its initial alignment and after major maintenance. They also must be compatible with the fact that the entire installation should be maintained by a limited staff. Consequently, the goals of the techniques involved in this processing design are essentially robust detection and identification of the relevant items of information present in images, but also the reduction of the number of parameters accessible to the operators. This paper provides a general overview of how the TS is aligned before focusing on the image processing techniques developed to identify and measure the beam centering, since the major difference between the LIL and LMJ TS is the type of centering detector. These techniques have been developed and tested thoroughly against sets of up to 57 images representing both nominal and extreme conditions acquired during recent experiments on the Laser Integration Line (LIL). This facility is fully consistent with the LMJ requirements, a complete laser chain with 4 beamlines. After presenting the basic design principles, we focus on the performances as demonstrated and measured.

Citation Download Citation

Laurent Hilsz, Jean-Christophe Benoit, Florence Poutriquet, Olivier Bach, Frédéric Nicaise, and Alain Adolf "Redesign of the image processing techniques used for the alignment of the LMJ beams transportation section", Proc. SPIE 7797, Optics and Photonics for Information Processing IV, 77970D (7 September 2010); https://doi.org/10.1117/12.859669

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE