Paper
10 September 2010 Mechanically tunable photonic crystal lens
Y. Cui, V. A. Tamma, J.-B. Lee, W. Park
Author Affiliations +
Abstract
We designed, fabricated and characterized MEMS-enabled mechanically-tunable photonic crystal lens comprised of 2D photonic crystal and symmetrical electro-thermal actuators. The 2D photonic crystal was made of a honeycomb-lattice of 340 nm thick, 260 nm diameter high-index silicon rods embedded in low-index 10 μm thick SU-8 cladding. Silicon input waveguide and deflection block were also fabricated for light in-coupling and monitoring of focused spot size, respectively. When actuated, the electro-thermal actuators induced mechanical strain which changed the lattice constant of the photonic crystal and consequently modified the photonic band structure. This in turn modified the focal-length of the photonic crystal lens. The fabricated device was characterized using a tunable laser (1400~1602 nm) and an infrared camera during actuation. At the wavelength of 1450 nm, the lateral light spot size observed at the deflection block gradually decreased 40%, as applied current increased from 0 to 0.7 A, indicating changes in focal length in response to the mechanical stretching.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Y. Cui, V. A. Tamma, J.-B. Lee, and W. Park "Mechanically tunable photonic crystal lens", Proc. SPIE 7756, Active Photonic Materials III, 77561A (10 September 2010); https://doi.org/10.1117/12.860627
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photonic crystals

Actuators

Nickel

Silicon

Waveguides

Near field scanning optical microscopy

Finite-difference time-domain method

Back to Top