Paper
19 May 2010 Multicore fibers for high-brilliance laser beam delivery
Moritz M. Vogel, Thomas Rataj, Armin Austerschulte, Andreas Popp, Marwan Abdou-Ahmed, Thomas Liebig, Andreas Voss, Thomas Graf
Author Affiliations +
Abstract
A passive few-mode multicore fiber consisting of 7 coupled cores is investigated. The fiber is compared to a largemode- area step-index fiber, with the same number of modes and a similar mode field area. Based on the 7-core fiber results a single transverse mode multicore fiber, with a mode field area of 465 μm2 at 1050 nm, delivering virtually diffraction limited output beam quality is demonstrated. Stimulated Raman threshold measurements are presented and a fundamental mode high-power beam transport with more than 350 W is shown.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Moritz M. Vogel, Thomas Rataj, Armin Austerschulte, Andreas Popp, Marwan Abdou-Ahmed, Thomas Liebig, Andreas Voss, and Thomas Graf "Multicore fibers for high-brilliance laser beam delivery", Proc. SPIE 7721, Solid State Lasers and Amplifiers IV, and High-Power Lasers, 772104 (19 May 2010); https://doi.org/10.1117/12.854528
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Fiber lasers

Step index fibers

Beam delivery

Cladding

Raman spectroscopy

Diffraction

RELATED CONTENT

A new method of efficient side pumping for high power...
Proceedings of SPIE (October 04 2006)
Advances in holey fibers
Proceedings of SPIE (July 03 2003)
High-power fiber lasers and amplifiers
Proceedings of SPIE (December 23 2004)
Eliptically polarizing optical fiber
Proceedings of SPIE (December 09 1999)

Back to Top