Tunable diffractive optical elements on various electro active polymers

Sebastian Döring; Matthias Kollosche; Niko Hildebrandt; Joachim Stumpe; Guggi Kofod

doi:10.1117/12.854258

12 May 2010 Tunable diffractive optical elements on various electro active polymers

Sebastian Döring, Matthias Kollosche, Niko Hildebrandt, Joachim Stumpe, Guggi Kofod

Proceedings Volume 7716, Micro-Optics 2010; 77160F (2010) https://doi.org/10.1117/12.854258
Event: SPIE Photonics Europe, 2010, Brussels, Belgium

Abstract

An innovative approach for voltage-tunable optical gratings based on dielectric elastomer actuators (DEAs) using electro active polymers is presented. Sinusoidal surface gratings, holographically written into azobenzene containing films, are transferred via nanoimprinting to DEAs of different carrier materials. We demonstrate that the surface relief deformation depends on the mechanical and geometrical properties of the actuators. The tested DEAs were made using commercially available elastomers, including a tri-block copolymer poly-styrene-ethylene-butadiene-styrene (SEBS), a silicone polydimethylsiloxane rubber (PDMS) and commonly used polyacrylic glue. The polyacrylic glue is ready to use, whereas the SEBS and the PDMS precursors have to be processed into thin films via different casting methods. The DEA material was pre-stretched, fixed to a stiff frame and coated with stretchable electrodes in appropriate designs. Since the actuation strain of the DEA depends strongly upon the conditions such as material properties, pre-stretch and geometry, the desired voltage-controllable deformations can be optimized during manufacturing of the DEA and also in the choice of materials in the grating transfer process. A full characterization of the grating deformation includes measurements of the grating pitch and depth modulation, plus the change of the diffraction angle and efficiency. The structural surface distortion was characterized by measuring the shape of the transmitted and diffracted laser beam with a beam profiling system while applying an electro-mechanical stress to the grating. Such surface distortions may lead to decreasing diffraction efficiency and lower beam quality. With properly chosen manufacturing parameters, we found a period shift of up to 9 % in a grating with 1 μm pitch. To describe the optical behavior, a model based on independently measured material parameters is presented.

Citation Download Citation

Sebastian Döring, Matthias Kollosche, Niko Hildebrandt, Joachim Stumpe, and Guggi Kofod "Tunable diffractive optical elements on various electro active polymers", Proc. SPIE 7716, Micro-Optics 2010, 77160F (12 May 2010); https://doi.org/10.1117/12.854258

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available