Paper
3 May 2010 Comparison of four midwave (3-5 μm) f2 objectives in the sense of their thermal performance
Altug Uçar, Kutlu Demir Kandemir, Sule Sendogdu Yilmaz
Author Affiliations +
Abstract
Passive athermalization of infrared (IR) imager objectives such as thermal goggles and binoculars which are exposed to variable atmospheric conditions is a critical issue. In this study, an athermal 50 mm f2 midwave objective design is compared with three similar commercially available objectives in terms of modulation transfer function (MTF) in Nyquist frequency under varying temperature conditions. The test setup constructed to enable the experimental comparison and the test process utilized are described. Finally, the results obtained are comparatively evaluated.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Altug Uçar, Kutlu Demir Kandemir, and Sule Sendogdu Yilmaz "Comparison of four midwave (3-5 μm) f2 objectives in the sense of their thermal performance", Proc. SPIE 7660, Infrared Technology and Applications XXXVI, 76602A (3 May 2010); https://doi.org/10.1117/12.858103
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation transfer functions

Infrared imaging

Objectives

Infrared radiation

Imaging systems

Thermography

Defense technologies

Back to Top