Optimizing operating parameters of spectrophotometer for testing transmission spectrum of optical substrate

Huasong Liu; Dandan Liu; Yiqin Ji; Zhanshan Wang; Deying Chen; Zhengxiang Shen; Bin Ma; Wei Zhang; Muxiao Liu; Zhixin Wu; Ri Wang

doi:10.1117/12.866185

11 October 2010 Optimizing operating parameters of spectrophotometer for testing transmission spectrum of optical substrate

Huasong Liu, Dandan Liu, Yiqin Ji, Zhanshan Wang, Deying Chen, Zhengxiang Shen, Bin Ma, Wei Zhang, Muxiao Liu, Zhixin Wu, Ri Wang

Author Affiliations +

Proceedings Volume 7656, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment; 765604 (2010) https://doi.org/10.1117/12.866185
Event: 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies, 2010, Dalian, China

Abstract

The optical characteristics of substrates are the essential content of research work for thin film optics. The spectrophotometer is one of the important instruments to test transmittance and reflectance of different substrates or coating components. The test accuracy of transmission spectrum of the substrates has direct influenced on optical constants reverse engineering of thin film on the substrate. In this paper, SCHOTT grade LITHOSIL_Q0 fused silica substrate was chosen as standard substrate and was tested transmission spectrum in region 380nm-860nm to use the Lambda-900 spectrophotometer. By comparing the measured transmission spectrum with standard SCHOTT grade LITHOSIL_Q0 fused silica substrate transmission spectrum can be calculated measured errors. In the experiments, the orthogonal experimental design method is used. Sample pool aperture, scan speed, slit width and sampling data interval operating parameters were chosen as key factors (three levels were chosen in each factor). L₉ (3⁴) orthogonal table was used for analysis the experiments results. Nine experiment results analyzed to determine the operating parameters of the influence measured accuracy were as follows: the sample pool aperture, scan speed, slit width, the sampling data interval. Finally, no iris, scan speed 250nm/s, slit width 3nm, sampling data interval 1nm were used a combination of the operating parameters to measure of transmission spectrum of the SCHOTT grade LITHOSIL_Q0 samples. Measured maximum and minimum absolute error are 0.1355% and 0.0771%, respectively. The operating parameters could be applied to transmittance spectrum test of every substrate, or the spectrum could be extended.

Citation Download Citation

Huasong Liu, Dandan Liu, Yiqin Ji, Zhanshan Wang, Deying Chen, Zhengxiang Shen, Bin Ma, Wei Zhang, Muxiao Liu, Zhixin Wu, and Ri Wang "Optimizing operating parameters of spectrophotometer for testing transmission spectrum of optical substrate", Proc. SPIE 7656, 5th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 765604 (11 October 2010); https://doi.org/10.1117/12.866185

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available