Study on practical application to pattern top resist loss measurement by CD-SEM for high NA immersion lithography

Toru Ishimoto; Naoki Yasui; Norio Hasegawa; Maki Tanaka; Shaunee Cheng

doi:10.1117/12.846541

1 April 2010 Study on practical application to pattern top resist loss measurement by CD-SEM for high NA immersion lithography

Toru Ishimoto, Naoki Yasui, Norio Hasegawa, Maki Tanaka, Shaunee Cheng

Author Affiliations +

Proceedings Volume 7638, Metrology, Inspection, and Process Control for Microlithography XXIV; 76382P (2010) https://doi.org/10.1117/12.846541
Event: SPIE Advanced Lithography, 2010, San Jose, California, United States

Abstract

With semiconductor technology moving to smaller patterns after the 45nm hp node, introduction of high-NA immersion lithography progresses, and with it, the challenge of decreasing process latitude. The decreasing lithography tool focus margin is mentioned as one of the key problems of a high-NA immersion lithography process. Tool focus fluctuation has an impact on resist pattern shape and not only does CD change, pattern height also decreases. As a result of previous studies [1][2], it is understood that the resist loss influences pattern formation after etch, and it was confirmed that resist loss is important for CD control. We observe correlation between the resist top roughness and the resist loss, and evaluate the resist loss measurement function by quantifying the resist top roughness. This principle of resist loss detection by measuring roughness is that a changing roughness of resist pattern top is detected as a fluctuation in image brightness on the CD-SEM. A measurement idea was proposed and performance evaluation has already been performed by using one kind of sample. In this study, we demonstrate the validity of resist loss detection by investigating various wafer conditions which contain the dependency by looking at two types of resist and different exposure tool illumination settings. Furthermore, we have confirmed the sensitivity limit of resist loss detection which is approximately above 10nm. Finally, we have discussed improving the resist loss detection sensitivity and considered the applicability of resist loss detection for the litho process monitor.

Citation Download Citation

Toru Ishimoto, Naoki Yasui, Norio Hasegawa, Maki Tanaka, and Shaunee Cheng "Study on practical application to pattern top resist loss measurement by CD-SEM for high NA immersion lithography", Proc. SPIE 7638, Metrology, Inspection, and Process Control for Microlithography XXIV, 76382P (1 April 2010); https://doi.org/10.1117/12.846541

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
12 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Critical dimension metrology

Scanning electron microscopy

Immersion lithography

Etching

Metrology

Photoresist processing

Lithography

Show All Keywords

Keywords/Phrases

Search In:

Publication Years