Paper
5 October 2009 Refractive index sensitivity enhancement of 81° tilted Bragg gratings by cladding etching
Author Affiliations +
Proceedings Volume 7503, 20th International Conference on Optical Fibre Sensors; 75036X (2009) https://doi.org/10.1117/12.834906
Event: 20th International Conference on Optical Fibre Sensors, 2009, Edinburgh, United Kingdom
Abstract
The properties of etched large angle tilted gratings (81o) are investigated. The attenuation peaks of the modes are found to shift to shorter wavelengths at a rate of ~5nm/min in a solution of 10% HF acid. The most sensitive modes are examined for different etching times creating the relationship that longer etching times results in an increase in overall sensitivity. Comparing the sensitivity of the tilted fibre grating, etched for 6 hours, 506.9nm/unri and the most sensitive LPG, period 164μm, 389.2nm/unri in the RI range 1.30-1.40 shows that the produced tilted grating is more sensitive than the LPG and in this range would ideally be suited for the used in Bio-sensing applications.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Edward Davies, Pouneh Saffari, Chengbo Mou, Kaiming Zou, and Lin Zhang "Refractive index sensitivity enhancement of 81° tilted Bragg gratings by cladding etching", Proc. SPIE 7503, 20th International Conference on Optical Fibre Sensors, 75036X (5 October 2009); https://doi.org/10.1117/12.834906
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Etching

Cladding

Refractive index

Fiber Bragg gratings

Sensors

Signal attenuation

Biosensing

Back to Top