Paper
10 September 2009 Optimizing the frequency response of a steering mirror mount for interferometry applications
Author Affiliations +
Abstract
The Navy Prototype Optical Interferometer (NPOI) in Flagstaff, Arizona, makes use of separate smaller telescopes spaced along a Y-array and used simultaneously to simulate an equivalent single large telescope. The performance of the NPOI can be improved by increasing the steering response of the 8-in. diameter Narrow Angle Tracker (NAT). The mirrors of the NAT correct the image position for atmospherically induced motion. The current tracker has a slow response due to the low fundamental frequency of the mount and limits the quality of the data. A higher frequency will allow a faster servo feedback to the steering mirror, which will enhance the tracking performance on stellar objects resulting in final fringe data of higher quality. Also, additional and fainter objects could be observed with a faster response system, and the interferometer as a whole would be less sensitive to fluctuations in atmospheric quality. Improvements in the NAT performance over the current cast aluminum frame and glass mirror were achieved by the use of advanced composite materials in the design of the frame and mirror. Various design possibilities were evaluated using finite element analysis. It was found that the natural frequency of the NAT can be increased from 68 to 217 Hz, and the corresponding weight decreased by a factor of 5.6, by using a composite mount with a composite mirror.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
F. Ernesto Penado and James H. Clark III "Optimizing the frequency response of a steering mirror mount for interferometry applications", Proc. SPIE 7424, Advances in Optomechanics, 742403 (10 September 2009); https://doi.org/10.1117/12.825338
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Composites

Mirror mounts

Foam

Glasses

Aluminum

Solids

Back to Top