Paper
27 August 2009 Solvent effect on the morphology of P3HT/PCBM films
Yu Xie, Pavel Dutta, Dorin Cengher, Venkat Bommisetty, Jing Li, David Galipeau, Qiquan Qiao
Author Affiliations +
Abstract
This work reports the study of solvent effects on the morphology for P3HT/PCBM films using chlorobenzene, 1, 2-dichlorobenzene and 1, 3-dichlorobenzene. Although extensive research has been focused on investigating devices using chlorobenzene and 1, 2-dichlorobenzene and it was found that 1, 2-dichlorobenzene led to an improved device performance, little work has been conducted in the morphology by comparing films fabricated via chlorobenzene, 1, 2-dichlorobenzene and 1, 3-dichlorobenzene. Atomic force microscopy (AFM) was performed to study the film morphology using chlorobenzene, 1, 2-dichlorobenzene and 1, 3-dichlorobenzene as solvents. Initial studies showed that the size of nanocrystallites in 1, 2-dichlorobenzene based films is smaller than nanoclusters in the other two films. Kelvin probe force microscopy (KFM) images, which were used to figure out the electron transport pathway, together with AFM images, showed the solvent effect on the morphology of these films. In addition, obvious red shifts were observed in the UV-Vis absorption spectra for the P3HT/PCBM blend from 1, 3-dichlorobenzene and 1, 2-dichlorobenzene compared to the one from chlorobenzene.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yu Xie, Pavel Dutta, Dorin Cengher, Venkat Bommisetty, Jing Li, David Galipeau, and Qiquan Qiao "Solvent effect on the morphology of P3HT/PCBM films", Proc. SPIE 7416, Organic Photovoltaics X, 74161Q (27 August 2009); https://doi.org/10.1117/12.826490
Lens.org Logo
CITATIONS
Cited by 8 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Absorption

Polymers

Atomic force microscopy

Crystals

Heterojunctions

Solar cells

Electro optic polymers

Back to Top