Direct interfaces for smart skins based on FPGAs

Óscar Oballe-Peinado; Julián Castellanos-Ramos; José A. Hidalgo-López; Fernando Vidal-Verdú

doi:10.1117/12.821642

20 May 2009 Direct interfaces for smart skins based on FPGAs

Óscar Oballe-Peinado, Julián Castellanos-Ramos, José A. Hidalgo-López, Fernando Vidal-Verdú

Proceedings Volume 7365, Bioengineered and Bioinspired Systems IV; 73650C (2009) https://doi.org/10.1117/12.821642
Event: SPIE Europe Microtechnologies for the New Millennium, 2009, Dresden, Germany

Abstract

Many artificial skins for robotics are based on piezoresistive films that cover an array of electrodes. Local preprocessing is a must in these systems to reduce errors and interferences and cope with the large amount of data provided by the sensor. This paper presents circuitry based on an FPGA to implement the interface to the artificial skin. The approach consists of a direct connection. The analog to digital conversion procedure is simple. It consists of measuring the discharging time of a capacitor through the resistance we want to read. This first proposed approach needs isolated tactels, so the raw sensor has to be fabricated in this way. If the tactile array is large, the strategy is not feasible. For instance, up to 288 pins are required to implement the interface with an array of 16x16 tactels. The proposal of this work for this case is to replace passive integrators by active ones. The result is a circuitry that allows the cancellation of interferences due to parasitic resistors and the sharing of the addressing tracks. Moreover, the FPGA allows the processing of data from the tactile sensor at a very high rate. This is because the high number of I/O pins of the device allows the conversion of many channels (in our case one per column) in parallel. The internal processing of the tactile image can also be done in parallel. This means we could be able to respond to very high demanding tasks in terms of dynamic requirements, like slippage detection. This also means we can run complex algorithms at real time, so a smart, programmable and powerful sensor is obtained.

Citation Download Citation

Óscar Oballe-Peinado, Julián Castellanos-Ramos, José A. Hidalgo-López, and Fernando Vidal-Verdú "Direct interfaces for smart skins based on FPGAs", Proc. SPIE 7365, Bioengineered and Bioinspired Systems IV, 73650C (20 May 2009); https://doi.org/10.1117/12.821642

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available