Paper
7 January 2009 New hot wire anemometer with alternate current and synchronic detection
Monica Stoian, Adil Rachek, Mihai Chirtoc
Author Affiliations +
Proceedings Volume 7297, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies IV; 72970X (2009) https://doi.org/10.1117/12.823644
Event: Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies IV, 2008, Constanta, Romania
Abstract
The feasibility of hot wire anemometer in to a new measurement configuration is demonstrated in this work and we validate our results by a numerical model. We have created an anemometer probe with hot wire using a new scheme, in alternate current and synchronic detection (3ω method). We use this instrument to register the velocity magnitude in boundary layer for a forced convection flow. The probe and its alimentation also the measuring support and bridge Wheatstone, have been created by us. The physical parameter was recorded is an exchange heat quantity between hot wire and fluid flow. In steady state, experimental data verify the numerical results with an average error of 3%.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Monica Stoian, Adil Rachek, and Mihai Chirtoc "New hot wire anemometer with alternate current and synchronic detection", Proc. SPIE 7297, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies IV, 72970X (7 January 2009); https://doi.org/10.1117/12.823644
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Convection

Calibration

Resistance

Wheatstone bridges

Bridges

Electroluminescence

Fluctuations and noise

Back to Top