Paper
21 May 2009 Electrical characteristics of phosphorescent organic light emitting devices with various emissive film thickness
Tao Wang, Junsheng Yu, Jun Wang, Lu Li, Yadong Jiang
Author Affiliations +
Proceedings Volume 7282, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 72823A (2009) https://doi.org/10.1117/12.831023
Event: AOMATT 2008 - 4th International Symposium on Advanced Optical Manufacturing, 2008, Chengdu, Chengdu, China
Abstract
Multilayer organic light-emitting diodes are fabricated with a structure of ITO/CuPc/NPB/CBP:(t-bt)2Ir(acac)/BCP/Alq/LiF:Al, and the current density vs voltage characteristic of organic phosphorescent devices is investigated. The current density characteristics of triple-layer devices with different emission layer thickness is simulated into three regions, which are no-emission region, emission region and saturated region, corresponding to ohmic contact model, trap charge limited current model and space charge limited current model. The film thickness of emission layer shows obvious effect on the device current density.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tao Wang, Junsheng Yu, Jun Wang, Lu Li, and Yadong Jiang "Electrical characteristics of phosphorescent organic light emitting devices with various emissive film thickness", Proc. SPIE 7282, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72823A (21 May 2009); https://doi.org/10.1117/12.831023
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Instrument modeling

Organic light emitting diodes

Multilayers

Electrodes

Remote sensing

Dielectrics

Lithium

Back to Top