High-power IR laser in SMT package

Benedikt Pritsch; Martin Behringer; Markus Arzberger; Christoph Wiesner; Robin Fehse; Jörg Heerlein; Josip Maric; Wojciech Giziewicz

doi:10.1117/12.810143

23 February 2009 High-power IR laser in SMT package

Benedikt Pritsch, Martin Behringer, Markus Arzberger, Christoph Wiesner, Robin Fehse, Jörg Heerlein, Josip Maric, Wojciech Giziewicz

Author Affiliations +

Proceedings Volume 7198, High-Power Diode Laser Technology and Applications VII; 71980F (2009) https://doi.org/10.1117/12.810143
Event: SPIE LASE: Lasers and Applications in Science and Engineering, 2009, San Jose, California, United States

Abstract

Laser dies in an optical power range of 1-3 Watts are widely assembled in popular TO- packages. TO-packages suffer from high thermal resistance and limited output power. Bad thermal contact between circuit boards and TO-devices can cause overheating of laser chips, significantly reducing the operating life time. We developed a compact high heat-load SMT package for an optical power up to 7 Watts in CW operation with good life time results. The new package for high power laser chips combines highly efficient heat dissipation with Surface-mount technology. A Direct-Bonded-Copper (DBC) substrate acts as a base plate for the laser chip and heat sink. The attached frame is used for electrical contacting and acts as beam reflector where the laser light is reflected at a 45° mirror. In the application the DBC base plate of the SMT-Laser is directly soldered to a Metal-Core-PCB by reflow soldering. The overall thermal resistance from laser chip to the bottom of a MC-PCB was measured as low as 2.5 K/W. The device placement process can be operated by modern high-speed mounting equipment. The direct link between device and MC-PCB allows CW laser operation up to 6-7 watts at wavelengths of 808nm to 940nm without facing any overheating symptom like thermal roll over. The device is suitable for CW and QCW operation. In pulsed operation short rise and fall times of <2ns have been demonstrated. New application fields like infrared illumination for sensing purposes in the automotive industry and 3D imaging systems could be opened by this new technology.

Citation Download Citation

Benedikt Pritsch, Martin Behringer, Markus Arzberger, Christoph Wiesner, Robin Fehse, Jörg Heerlein, Josip Maric, and Wojciech Giziewicz "High-power IR laser in SMT package", Proc. SPIE 7198, High-Power Diode Laser Technology and Applications VII, 71980F (23 February 2009); https://doi.org/10.1117/12.810143

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available