Paper
3 September 2008 An alternative design of holographic polarization-selective elements
Author Affiliations +
Abstract
The feasibility of conventional polarization-selective substrate-mode holograms is usually limited by the finite refractive index modulation strength. Therefore, in this study, a novel design of polarization selective element with a large diffraction angle is proposed based on the coupled-wave theory. The polarization selective element for 632.8nm is fabricated with VRP-M silver-halide recording material. The diffraction efficiencies of s- and p- components are 83% and 5%, and the calculated extinction ratios are 5.58 and 275, respectively. Polarization selective elements fabricated by the proposed method have all the merits of conventional substrate-mode hologram but not limited by the finite refractive index modulation of common recording materials.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jing-Heng Chen, Kun-Huang Chen, Jung-Ping Liu, Jiun-You Lin, and Nung-Yu Wu "An alternative design of holographic polarization-selective elements", Proc. SPIE 7072, Optics and Photonics for Information Processing II, 707210 (3 September 2008); https://doi.org/10.1117/12.797967
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Refractive index

Holograms

Modulation

Diffraction

Polarization

Chemical elements

Holography

Back to Top