Paper
19 May 2008 Fast integrated die-to-die transmitted, reflected and STARlight-2 defect inspection on memory masks
Andy Lan, Jenny Hsu, Swapnajit Chakravarty, Vincent Hsu, Ellison Chen, Eric Lu, John Miller
Author Affiliations +
Abstract
Single mode inspections, using die-to-die Transmitted (ddT) or die-to-die Reflected (ddR) modes, provides a high level of sensitivity to opaque and clear defects on reticles. Die-to-die (DD) inspections however, cannot inspect the scribes or frames which are potential locations for haze growth. Historically, STARLight-2TM (SL2) has been the only mode effectively utilized for contamination inspection in reticle scribes and frames. However, SL2 is designed for identifying contamination and not pattern defects on a mask. The solution presented here is Fast Integrated Inspection which includes ddT, ddR, and SL2, and allows the user to inspect a reticle for pattern and contamination defects over patterned areas and scribes simultaneously, and in unit time.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andy Lan, Jenny Hsu, Swapnajit Chakravarty, Vincent Hsu, Ellison Chen, Eric Lu, and John Miller "Fast integrated die-to-die transmitted, reflected and STARlight-2 defect inspection on memory masks", Proc. SPIE 7028, Photomask and Next-Generation Lithography Mask Technology XV, 70281J (19 May 2008); https://doi.org/10.1117/12.793060
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Inspection

Reticles

Contamination

Photomasks

Air contamination

Defect inspection

Opacity

Back to Top