Paper
22 July 2008 Characterization of prototype LSST CCDs
P. O'Connor, J. Frank, J. C. Geary, D. K. Gilmore, I. Kotov, V. Radeka, P. Takacs, J. A. Tyson
Author Affiliations +
Abstract
We present characterization methods and results on a number of new devices produced specifically to address LSST's performance goals, including flatness, QE, PSF, dark current, read noise, CTE, cosmetics, and crosstalk. The results indicate that commercially produced, thick n-channel over-depleted CCDs with excellent red response can achieve tight PSF at moderate applied substrate bias with no evidence of persistent image artifacts. We will also report ongoing studies of mosaic assembly techniques to achieve chip-to-chip co-planarity, high fill factor, and thermal stability.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
P. O'Connor, J. Frank, J. C. Geary, D. K. Gilmore, I. Kotov, V. Radeka, P. Takacs, and J. A. Tyson "Characterization of prototype LSST CCDs", Proc. SPIE 7021, High Energy, Optical, and Infrared Detectors for Astronomy III, 702106 (22 July 2008); https://doi.org/10.1117/12.790672
Lens.org Logo
CITATIONS
Cited by 16 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Charge-coupled devices

Large Synoptic Survey Telescope

Point spread functions

Quantum efficiency

Silicon

Prototyping

RELATED CONTENT

MTF and PSF measurements of the CCD273 84 detector for...
Proceedings of SPIE (August 28 2014)
Flash Technology for CCD Imaging in the UV
Proceedings of SPIE (December 10 1986)
Focal plane detectors for Dark Energy Camera (DECam)
Proceedings of SPIE (July 15 2010)
Study of silicon sensor thickness optimization for LSST
Proceedings of SPIE (June 15 2006)

Back to Top