Controlling the Hamburg Robotic Telescope: a description of the software

Jose N. González-Pérez; Alexander Hempelmann; Marco Mittag; Hans-Jürgen Hagen

doi:10.1117/12.796646

21 July 2008 Controlling the Hamburg Robotic Telescope: a description of the software

Jose N. González-Pérez, Alexander Hempelmann, Marco Mittag, Hans-Jürgen Hagen

Proceedings Volume 7019, Advanced Software and Control for Astronomy II; 70192V (2008) https://doi.org/10.1117/12.796646
Event: SPIE Astronomical Telescopes + Instrumentation, 2008, Marseille, France

Abstract

The Hamburg Robotic Telescope (HRT) is a fully automatic 1.2m telescope designed for high resolution spectroscopy of active stars. It uses the Heidelberg Extended Range Optical Spectrograph (HEROS) which is fed by a 50μm fiber connected to the Nasmyth focus of the telescope through an adapter. Here we present the software that controls the whole system of the HRT. This software works both in fully automatic and interactive mode. It organizes the interaction between the Central Control System (CCS: the core of the system) and the subsystems: building, telescope, spectrograph, adapter, environmental sensors (weather station and sky monitor) and scheduler. The CCS performs its operation by sending commands (ASCII messages through TCP/IP sockets) to the different subsystems. The robotic operation is divided into discrete procedures, such as "Initialization", "Observation" or "Calibration". Each procedure consists of a set of commands which will be carried out (sequentially or even in parallel) if a set of conditions is met: e.g. only when one command is successfully accomplished, the next will be sent. Furthermore, the Error Handler takes the necessary actions when a problem inhibits the normal progress of the observation (e.g. bad weather, non-detection of the target or technical problems. The scheduler selects the target from a primary list in a manner which combines the scientific priority with observational feasibility and the history of observations. Finally, we present the Automatic Reduction Pipeline developed on the basis of REDUCE, an IDL reduction package, to obtain the final spectrum from the raw data.

Citation Download Citation

Jose N. González-Pérez, Alexander Hempelmann, Marco Mittag, and Hans-Jürgen Hagen "Controlling the Hamburg Robotic Telescope: a description of the software", Proc. SPIE 7019, Advanced Software and Control for Astronomy II, 70192V (21 July 2008); https://doi.org/10.1117/12.796646

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available