Paper
16 April 2008 Development and enhancement of mobile robot arms for EOD applications
Matthew Berkemeier, Eric Poulson, Eric Aston, Josh Johnston, Brian Smith
Author Affiliations +
Abstract
Autonomous Solutions has multiple projects involving mobile robot arms for EOD applications. This paper will describe 3 such projects. In the first, a 5 DOF robot arm of our own design is mounted on a 4-wheeled omni-directional platform. The arm is capable of lifting 100 pounds at close to full extension, and it can lift significantly more at shorter distances. The operator can specify either individual joint control or "fly the gripper" control, where the individual joint velocities are automatically calculated in response to commanded gripper velocities. In the second project, 3D data of a scene of interest is gathered and then presented to the EOD technician, along with a representation of the arm. The technician can then rotate the scene and arm to obtain the best possible view for the task. In the final project, a 3 DOF arm will be mounted to an omni-directional platform. The arm and platform will be treated as a single 6 DOF manipulator, and the operator will specify 6 DOF gripper velocity commands using a 6-axis input device, such as those used for solid modeling programs.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Matthew Berkemeier, Eric Poulson, Eric Aston, Josh Johnston, and Brian Smith "Development and enhancement of mobile robot arms for EOD applications", Proc. SPIE 6962, Unmanned Systems Technology X, 69620P (16 April 2008); https://doi.org/10.1117/12.779138
Lens.org Logo
CITATIONS
Cited by 3 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Data modeling

3D visualizations

Mobile robots

Algorithm development

Stereoscopic cameras

Kinematics

Back to Top