Fabrication and control of an electrostatically levitated rotating gyro

Charles D. Ellis; Bogdan M. Wilamowski

doi:10.1117/12.783861

30 April 2008 Fabrication and control of an electrostatically levitated rotating gyro

Charles D. Ellis, Bogdan M. Wilamowski

Proceedings Volume 6959, Micro (MEMS) and Nanotechnologies for Space, Defense, and Security II; 69590Q (2008) https://doi.org/10.1117/12.783861
Event: SPIE Defense and Security Symposium, 2008, Orlando, Florida, United States

Abstract

There are significant efforts to develop gyroscopes using MEMS technology; accuracies of gyroscopes varying from rate-grade, through tactical-grade, to inertial grade. The random walk varies from 0.5 °/√h through 0.05 °/√h to 0.001 °/√h. The most common approach is to use vibratory gyros, which use mechanical elements (proof-mass) to sense the rotation. There are several types of vibratory gyroscopes now commercially available from Robert Bosch, BEI Syrtron Donner, Silicon Sensing Systems, MEMSens, and Analog Devices. Any higher accuracy gyroscopes require a rotating disk which is electrostatic levitated and spun. This device also does not have bearings and with large spinning velocity very high accuracy can be obtained. There are two publicly known attempts to develop MEMS rotating gyroscopes, one in Japan by the group associated with Tokimec and a similar concept is being developed in Europe led by M. Kraft. The European approach has more theoretical character. At AMNSTC we developed and fabricated another rotating gyroscope, which differs from the Tokimec design in several ways: three instead of four levitation electrodes are used, new 6 phase or 4 phase spinning concepts are implemented, better layout of vertical electrodes was used, new concept of vias were developed, and new fabrication method was developed, which used standard MEMS processing with as few as 5 masking steps, allowing the realization of low cost inertial measurement systems. Several batches of gyroscopes were fabricated and measured.

Citation Download Citation

Charles D. Ellis and Bogdan M. Wilamowski "Fabrication and control of an electrostatically levitated rotating gyro", Proc. SPIE 6959, Micro (MEMS) and Nanotechnologies for Space, Defense, and Security II, 69590Q (30 April 2008); https://doi.org/10.1117/12.783861

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available