Thulium fiber laser-pumped mid-IR OPO

Daniel Creeden; Min Jiang; Peter A. Budni; Peter A. Ketteridge; Scott D. Setzler; York E. Young; John C. McCarthy; Peter G. Schunemann; Thomas M. Pollak; Parviz Tayebati; Evan P. Chicklis

doi:10.1117/12.775196

14 April 2008 Thulium fiber laser-pumped mid-IR OPO

Daniel Creeden, Min Jiang, Peter A. Budni, Peter A. Ketteridge, Scott D. Setzler, York E. Young, John C. McCarthy, Peter G. Schunemann, Thomas M. Pollak, Parviz Tayebati, Evan P. Chicklis

Author Affiliations +

Proceedings Volume 6952, Laser Source Technology for Defense and Security IV; 69520S (2008) https://doi.org/10.1117/12.775196
Event: SPIE Defense and Security Symposium, 2008, Orlando, Florida, United States

Abstract

Fiber lasers are advancing rapidly due to their ability to generate stable, efficient, and diffraction-limited beams with significant peak and average powers. This is of particular interest as fibers provide an ideal pump source for driving parametric processes. Most nonlinear optical crystals which provide phase-matching to the mid-IR at commercially available fiber pump wavelengths suffer from high absorption above 4μm, resulting in low conversion efficiencies in the 4-5μm spectral region. The nonlinear optical crystals which combine low absorption in this same spectral region with high nonlinear gain require pumping at longer wavelengths (typically >1.9μm). In this paper, we report a novel mid-IR OPO pumped by a pulsed thulium-doped fiber laser operating at 2-microns. The eyesafe thulium-fiber pump laser generates >3W of average power at >30kHz repetition rate with 15-30ns pulses in a near diffraction-limited beam. The ZnGeP₂ (ZGP) OPO produces tunable mid-IR output power in the 3.4-3.99μm (signal) and the 4.0-4.7μm (idler) spectral regions in both singly resonant (SRO) and doubly resonant (DRO) formats. The highest mid-IR output power achieved from this system was 800mW with 20% conversion efficiency at 40kHz. In a separate experiment, the 3W of 2-micron light was further amplified to the 20W level. This amplified output was also used to pump a ZGP OPO, resulting in 2W of output power in the mid-IR. To our knowledge, these are the first demonstrations of a fiber-pumped ZGP OPO.

Citation Download Citation

Daniel Creeden, Min Jiang, Peter A. Budni, Peter A. Ketteridge, Scott D. Setzler, York E. Young, John C. McCarthy, Peter G. Schunemann, Thomas M. Pollak, Parviz Tayebati, and Evan P. Chicklis "Thulium fiber laser-pumped mid-IR OPO", Proc. SPIE 6952, Laser Source Technology for Defense and Security IV, 69520S (14 April 2008); https://doi.org/10.1117/12.775196

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available