Modulation transfer function measurement on QWIP focal plane array

S. B. Rafol; E. Cho

doi:10.1117/12.780050

15 April 2008 Modulation transfer function measurement on QWIP focal plane array

S. B. Rafol, E. Cho

Proceedings Volume 6941, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XIX; 69410X (2008) https://doi.org/10.1117/12.780050
Event: SPIE Defense and Security Symposium, 2008, Orlando, Florida, United States

Abstract

Modulation Transfer Function (MTF) is an important quantitative measure of imaging quality of an infrared camera system. It provides quantitative description on how infrared camera system transfers contrast from object to image space. The higher the MTF values as a function of spatial frequency, the better the reconstruction of fine detail of the object space. Therefore, MTF is a good metric of performance measure for infrared camera systems. However, for QWIP Focal Plane Array (FPA) there is little comprehensive MTF result that has been reported. The over-sampled tilted knife-edge technique to generate the MTF plot is the most common method to measure MTF. Thus we have developed a method to construct the edge function from the image of tilted knife-edge. This construction is reversible since the tilted knife-edge image can be reconstructed from the edge function. Unfortunately, the knife-edge technique requires knowledge of the lens' MTF. The lens MTF is removed from the total system MTF to derive the detector and electronic MTF. In order to validate the knife-edge technique, an interferometric and small spot illumination method of MTF measurement was conducted. In the interferometric method the QWIP FPA was placed at the pupil plane, and therefore diffraction limitation was avoided. The interferogram also provides a high-resolution plot of the spectral response of the detector. The spot illumination mimics the point-spread function. Since spot illumination requires re-imaging of point source by lenses, it also requires lens' MTF that needs to be divided out. The objective of this paper is to report on an extensive MTF characterization of large format QWIP FPA.

Citation Download Citation

S. B. Rafol and E. Cho "Modulation transfer function measurement on QWIP focal plane array", Proc. SPIE 6941, Infrared Imaging Systems: Design, Analysis, Modeling, and Testing XIX, 69410X (15 April 2008); https://doi.org/10.1117/12.780050

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available