Paper
17 March 2008 Fuselage inspection of Boeing-737 using lock-in thermography
Markus Tarin, André Kasper
Author Affiliations +
Abstract
Optically modulated elastic waves enter the surface of the inspected material by absorption of thermal radiation. An inhomogeneous disturbance in the material causes locally enhanced losses. Such material defects heat up at a different rate than the surrounding more homogenous material and therefore generate differences in thermal contrast. Modulating the amplitude of the optical stimulus turns defects into thermal wave transmitters. The frequency of the stimulus signal must be matched to the specific thermal conductivity and mass density of the inspected material. It is possible to locate defects at different depths below the surface by varying the amplitude of the stimulus wave. Proper detection of thermal waves resulting from material defects near the surface requires a measurement setup that allows the recording of thermal images from an infrared camera. The recorded images can then be compared against the phase of the stimulus signal. This photo-thermal lock-in thermography method not only allows the evaluation of the amplitudal thermal wave information but more importantly it also allows for the extraction of the phase information. The phase shift between the stimulus signal and the captured thermal wave is directly correlated to the thermal propagation time.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Markus Tarin and André Kasper "Fuselage inspection of Boeing-737 using lock-in thermography", Proc. SPIE 6939, Thermosense XXX, 693919 (17 March 2008); https://doi.org/10.1117/12.777008
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications and 6 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Thermography

Inspection

Modulation

Halogens

Temperature metrology

Cameras

Wave propagation

Back to Top