Paper
2 April 2008 Inhomogeneous creep fields in PLZT: an experimental study
Author Affiliations +
Abstract
The technique of birefringence imaging was exploited to observe the evolution of creeping strain fields in transparent PLZT 8/65/35 samples. PLZT samples with features that produce non-uniform fields were loaded with constant voltage boundary conditions. The resulting birefringence contours evolve with time and can be related to strain measurements. Three experimental arrangements are reported: partial surface electrodes producing intense fields near an electrode tip, a round insulating hole producing local concentration of electric field, and a thin, sharp crack producing crack tip fields. In each case, material was initially in the as-sintered (unpoled) state, and was loaded with nominal electric field strengths that were well below the coercive field. However, the birefringence imaging indicates significant remanent strain evolving over a time period of order 103s. The resulting mean electric displacements are greatly enhanced relative to uniform field conditions at the same mean field strength. The measurements show only weak interaction between thin cracks and the applied electric field, suggesting that the thin cracks are effectively permeable. The results are of potential use in calibrating multi-axial and time dependent material models.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Q. D. Liu and J. E. Huber "Inhomogeneous creep fields in PLZT: an experimental study", Proc. SPIE 6929, Behavior and Mechanics of Multifunctional and Composite Materials 2008, 69290B (2 April 2008); https://doi.org/10.1117/12.774385
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Birefringence

Polishing

Surface finishing

Microscopes

Switching

Dielectrics

Back to Top