Light Scattering And Absorption In Infrared Laser Mirrors

D. L. Decker; H. E. Bennett; J. N. Bennett

doi:10.1117/12.954554

24 November 1975 Light Scattering And Absorption In Infrared Laser Mirrors

D. L. Decker, H. E. Bennett, J. N. Bennett

Proceedings Volume 0069, Optical Design Problems in Laser Systems; (1975) https://doi.org/10.1117/12.954554
Event: 19th Annual Technical Symposium, 1975, San Diego, United States

Abstract

The demands on the performance of mirrors used in high energy laser applications are severe. They may be summarized as follows: (1) excellent optical figure even under high thermal load, (2) high catastrophic damage threshold, and (3) low scattering level. Light scattering, particularly backscattering, is important, and can result in cavity depumping or damage to components in the cavity. Scattering is a consequence of microirregularities, localized imperfections, and contamination at the mirror surface. For many surfaces total integrated scatter (TIS) for visible wavelengths follows a 1/λ2 dependence, as predicted theoretically for distributed microirregularities. However, at infrared wavelengths, TIS levels often are much larger than predicted by this theory. Evidence that this additional scatter is a consequence of dust and other localized imperfections rather than distributed microirregularities will be presented. Comparison of TIS levels and angular scattering distribution measurements for several surfaces with the results that a newly derived theory using directly measured FECO surface statistical information will be made. Low absorption under thermal load is also a very desirable characteristic of laser mirrors, both because mirror heating causes loss of optical figure and because the damage threshold of the mirror surface is related to its reflectance, R, as a function of temperature, T. Typically, R 1 so that even large percentage changes in absorption with increasing tem-perature result in very small changes in dR/dT. However a new instrument has been designed to measure these small changes and measurements on a number of mirror coatings made with a precision of better than 1 x 10^-4 will be presented and interpreted.

Citation Download Citation

D. L. Decker, H. E. Bennett, and J. N. Bennett "Light Scattering And Absorption In Infrared Laser Mirrors", Proc. SPIE 0069, Optical Design Problems in Laser Systems, (24 November 1975); https://doi.org/10.1117/12.954554

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available