Paper
4 January 2008 Implementation of OFDM multimode fiber communication system in the Simulink environment
Wei Xie, Guijun Hu, Qing Deng
Author Affiliations +
Abstract
An implementation of orthogonal frequency division multiplexing (OFDM) multimode fiber communication system test bed developed in simulink is proposed in this paper. The system design and implementation is discussed. Based on the simulation system, the effect of different fiber lengths, various numbers of the OFDM subcarriers and transmission data rates on this system has been considered. The simulation results show that with the increase of fiber lengths, the systems bit error rate (BER) increase as follow. In addition, even though using a large number of subcarriers can reduce the amplitude variation cause by the magnitude response of the multimode fiber since the bit rate per subcarrier signal is small, the BER from the system with large number of subcarriers is not always better than the BER from the system with small number of subcarriers. The simulation system test bed is useful to make the following studies more convenient, and also is helpful to establish a practical system.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei Xie, Guijun Hu, and Qing Deng "Implementation of OFDM multimode fiber communication system in the Simulink environment", Proc. SPIE 6837, Information Optics and Photonics Technologies II, 68371M (4 January 2008); https://doi.org/10.1117/12.753942
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Multimode fibers

Orthogonal frequency division multiplexing

Simulink

Telecommunications

Computer simulations

Channel projecting optics

Electro optical modeling

Back to Top