Paper
16 November 2007 Optical method for evaluating the impact response of 1" HDD arm
Yusaku Fujii, Dong-Wei Shu
Author Affiliations +
Proceedings Volume 6722, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 672216 (2007) https://doi.org/10.1117/12.782961
Event: 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 2007, Chengdu, China
Abstract
Mechanical response of an actuator arm of a 1-inch hard disk drive (HDD) against a small and steep impact load is accurately measured by means of modifying the Levitation Mass Method (LMM) whose basic concept was proposed by the first author. In the method, a mass that is levitated with an aerostatic linear bearing, and hence encounters negligible friction, is made to collide with a subject actuator arm and the dynamic bending test for the arm is realized. During the collision the Doppler frequency shift of the laser beam reflecting from the mass is accurately measured using an optical interferometer. The velocity, the position, the acceleration and the inertial force of the mass are calculated from the measured time-varying Doppler frequency shift. The importance and the problems concerning the present knowledge on the mechanical response of an actuator arm of a 1-inch hard disk drive (HDD) are also discussed.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yusaku Fujii and Dong-Wei Shu "Optical method for evaluating the impact response of 1" HDD arm", Proc. SPIE 6722, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 672216 (16 November 2007); https://doi.org/10.1117/12.782961
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Doppler effect

Transducers

Calibration

Interferometers

Actuators

Prisms

Beam splitters

Back to Top