Paper
14 November 2007 Analysis of the force properties of photonic crystal fiber in the v-groove
Author Affiliations +
Proceedings Volume 6722, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 67220V (2007) https://doi.org/10.1117/12.782906
Event: 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 2007, Chengdu, China
Abstract
This paper uses a contact mechanics and radial crushing strength to analyze the force properties of photonic crystal fiber which is placed in the V-groove. In this paper, we calculate the stress distribution of the fiber in the V-groove under two ultimate conditions. The first one is supposed that fiber is a solid cylinder which is fabricated by isotropy material. The second one is supposed that fiber is a hollow cylinder. It is calculated that the maximal stress of the fiber is the tension. This stress is near the outer air holes which are parallel to the contact surface. Then we use finite-element (FE)approach to testify the result and calculate the maximal stress the photonic crystal fiber could hold. Finally, we present the stress distribution and the strain of the fiber.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shuo Ma, Weihong Bi, Guangwei Fu, and Guoqing Wu "Analysis of the force properties of photonic crystal fiber in the v-groove", Proc. SPIE 6722, 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 67220V (14 November 2007); https://doi.org/10.1117/12.782906
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photonic crystal fibers

Solids

Fusion splicing

Optical fibers

Imaging spectroscopy

Quartz

Structured optical fibers

Back to Top