Paper
22 February 2008 High speed online thin steel laser drilling and marking system
XueSheng Liu, YingHua Cao, Xin Yan, Tao Huang, ZhiYong Wang
Author Affiliations +
Proceedings Volume 6622, International Symposium on Photoelectronic Detection and Imaging 2007: Laser, Ultraviolet, and Terahertz Technology; 66220Y (2008) https://doi.org/10.1117/12.790813
Event: International Symposium on Photoelectronic Detection and Imaging: Technology and Applications 2007, 2007, Beijing, China
Abstract
High beam quality pulsed Q-switched Nd:YAG solid-state laser 450m/s high speed online laser drilling and marking system is reported. By PCL-836(A) realizing the control of laser power supply, AQ-switcher and two-dimension scanner. Synchronizing pulsed laser and AQ-switcher through the delay of industry computer, and realizing short pulsed width for laser drilling, long pulsed width for laser marking through setting the releasing time of laser power supply. And adopting the two-dimension scanner to catch up with the high speed moving thin steel, which keeps the laser and steel relatively inaction. Drill at different positions of the moving steel, and use the pinhole to test the drilled holes.
© (2008) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
XueSheng Liu, YingHua Cao, Xin Yan, Tao Huang, and ZhiYong Wang "High speed online thin steel laser drilling and marking system", Proc. SPIE 6622, International Symposium on Photoelectronic Detection and Imaging 2007: Laser, Ultraviolet, and Terahertz Technology, 66220Y (22 February 2008); https://doi.org/10.1117/12.790813
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser drilling

Laser marking

Pulsed laser operation

Nd:YAG lasers

Power supplies

Q switched lasers

3D scanning

RELATED CONTENT


Back to Top