Paper
7 May 2007 Time reversed photonic beamforming of arbitrary waveform ladar arrays
Author Affiliations +
Abstract
Herein is described a novel approach of performing adaptive photonic beam forming of an array of optical fibers with the expressed purpose of performing laser ranging. The beam forming technique leverages the concepts of time reversal, previously implemented in the sonar community, and wherein photonic implementation has recently been described for use by beamforming of ultra-wideband radar arrays. Photonic beam forming is also capable of combining the optical output of several fiber lasers into a coherent source, exactly phase matched on a pre-determined target. By implementing electro-optically modulated pulses from frequency chirped femtosecond-scale laser pulses, ladar waveforms can be generated with arbitrary spectral and temporal characteristics within the limitations of the wide-band system. Also described is a means of generating angle/angle/range measurements of illuminated targets.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Joseph L. Cox, Henry Zmuda, Rebecca J. Bussjaeger, Reinhard K. Erdmann, Michael L. Fanto, Michael J. Hayduk, and John E. Malowicki "Time reversed photonic beamforming of arbitrary waveform ladar arrays", Proc. SPIE 6572, Enabling Photonics Technologies for Defense, Security, and Aerospace Applications III, 657209 (7 May 2007); https://doi.org/10.1117/12.723749
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
LIDAR

Sensors

Target detection

Signal processing

Modulation

Pulsed laser operation

Fiber Bragg gratings

RELATED CONTENT

Compressive full waveform lidar
Proceedings of SPIE (May 05 2017)
LADAR object detection and tracking
Proceedings of SPIE (October 18 2004)
Performance of an FM cw prototype ladar using a 32...
Proceedings of SPIE (August 21 2003)

Back to Top