Manufacturing of ionic polymer-metal composites (IPMCs) that can actuate into complex curves

Boyko L. Stoimenov; Jonathan M. Rossiter; Toshiharu Mukai

doi:10.1117/12.715560

4 April 2007 Manufacturing of ionic polymer-metal composites (IPMCs) that can actuate into complex curves

Boyko L. Stoimenov, Jonathan M. Rossiter, Toshiharu Mukai

Proceedings Volume 6524, Electroactive Polymer Actuators and Devices (EAPAD) 2007; 65240T (2007) https://doi.org/10.1117/12.715560
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2007, San Diego, California, United States

Abstract

Ionic polymer-metal composites (IPMC) are soft actuators with potential applications in the fields of medicine and biologically inspired robotics. Typically, an IPMC bends with approximately constant curvature when voltage is applied to it. More complex shapes were achieved in the past by pre-shaping the actuator or by segmentation and separate actuation of each segment. There are many applications for which fully independent control of each segment of the IPMC is not required and the use of external wiring is objectionable. In this paper we propose two key elements needed to create an IPMC, which can actuate into a complex curve. The first is a connection between adjacent segments, which enables opposite curvature. This can be achieved by reversing the polarity applied on each side of the IPMC, for example by a through-hole connection. The second key element is a variable curvature segment. The segment is designed to bend with any fraction of its full bending ability under given electrical input by changing the overlap of opposite charge electrodes. We demonstrated the usefulness of these key elements in two devices. One is a bi-stable buckled IPMC beam, also used as a building block in a linear actuator device. The other one is an IPMC, actuating into an S-shaped curve with gradually increasing curvature near the ends. The proposed method of manufacturing holds promise for a wide range of new applications of IPMCs, including applications in which IPMCs are used for sensing.

Citation Download Citation

Boyko L. Stoimenov, Jonathan M. Rossiter, and Toshiharu Mukai "Manufacturing of ionic polymer-metal composites (IPMCs) that can actuate into complex curves", Proc. SPIE 6524, Electroactive Polymer Actuators and Devices (EAPAD) 2007, 65240T (4 April 2007); https://doi.org/10.1117/12.715560

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available