Paper
20 February 2007 Electric-arc-induced long period fiber gratings for gain equalization of erbium-doped optical amplifiers
Author Affiliations +
Abstract
Long-Period Fiber Gratings (LPFGs) were fabricated in single mode fibers (SMF28) by using electric arc discharges produced from a commercial fiber splicer. In our experimental set-up, we noticed that, during each arc, the fiber becomes slightly tapered due to the presence of the longitudinal tension: the quantitative effect depends on the time length and arc power. We have experimentally studied how the LPFG performance may be affected by the arc discharge process, and we found that, with periods typically of few hundreds microns, the spectral response of the grating depends on the period &Lgr;, the intensity of the perturbation, the grating length and the type of mode-coupling induced. The reproducibility of the grating is very important, in particular for applications like a gain equalizer for an erbium-doped optical amplifier. In the modelling of the process, the mode coupling induced by the LPFG cannot be estimated directly from the transmission spectra; therefore, we propose a method to determine the mode-coupling occurring in the fiber and to assess the index modulation induced by the electric arcs. This method combines experimental and simulated data, and its use is not limited to the case of electric-arc-induced LPFGs.
© (2007) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
I. Cacciari, M. Brenci, R. Falciai, G. Nunzi Conti, S. Pelli, and G. C. Righini "Electric-arc-induced long period fiber gratings for gain equalization of erbium-doped optical amplifiers", Proc. SPIE 6469, Optical Components and Materials IV, 64690X (20 February 2007); https://doi.org/10.1117/12.701961
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Modulation

Optical amplifiers

Fusion splicing

Refractive index

Diffusion

Electrodes

RELATED CONTENT

Cladding pumped 70 kW peak power 2 ns pulse Er...
Proceedings of SPIE (February 26 2018)
EDFA gain flattening based on the cascade of step changed...
Proceedings of SPIE (November 11 2008)
From S to C band amplification in a depressed...
Proceedings of SPIE (April 17 2006)
Erbium-doped fiber design for improved splicing performance
Proceedings of SPIE (January 10 2005)
Long-period fiber gratings in H2-loaded fiber
Proceedings of SPIE (October 19 2001)

Back to Top