Paper
6 November 2006 Phase-only pupil filtering confocal measurement system with higher lateral resolution
Lirong Qiu, Zhengde Feng, Dingguo Sha
Author Affiliations +
Abstract
Phase-only pupil filtering confocal microscopy (PFCM), a new approach is proposed to achieve a higher lateral resolution required for ultraprecision measurement of microstructural workpieces, which uses a three-zone phase-only pupil filter with lateral superresolution capability obtained through optimized design to change the confocal microscopy system's (CMS) distribution of three-dimensional point spread function, so that the CMS lateral resolution is therefore significantly improved while its axial resolution is slightly improved. Preliminary experimental comparison and analyses indicate that, the lateral and axial resolutions of PFCM are better than 0.2μm and 2nm, respectively, when λ= 632.8 nm, NA=0.85 and lateral spot size with a three-zone phase-only pupil filter GT=0.65.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Lirong Qiu, Zhengde Feng, and Dingguo Sha "Phase-only pupil filtering confocal measurement system with higher lateral resolution", Proc. SPIE 6357, Sixth International Symposium on Instrumentation and Control Technology: Signal Analysis, Measurement Theory, Photo-Electronic Technology, and Artificial Intelligence, 635740 (6 November 2006); https://doi.org/10.1117/12.717275
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Confocal microscopy

Phase only filters

Curium

Optical filters

Sensors

Objectives

Super resolution

Back to Top