Paper
20 October 2006 The effect of sub-layer condition on the OPC model
Jaeyoung Choi, Jaehyun Kang, Yeonah Shim, Kyunghee Yun, Junseok Lee, Yongseok Lee, Keeho Kim
Author Affiliations +
Abstract
OPC(Optical Proximity Correction) has become an indispensable tool used in deep sub-wavelength lithograph process enabling highly accurate CD (Critical Dimension) control as design rule shrinks. Current model based OPC is a combination of optical and process model to predict lithography process. At this time, the accurate OPC model can be made by accurate empirical measurement data. Therefore empirical measurement data affects OPC model directly. In the case of gate layer, it affects to device performance significantly and CD spec is controlled tightly. Because gate layer is hanging on between active area and sti area, the gate CD is affected by different sub layer stack and step height. This paper will analyze that the effect of sub layer on the OPC model and show difference EPE value results at the patterns such as iso line, iso space,pitch, line end and T_junction between poly and gate model using constant threshold model.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jaeyoung Choi, Jaehyun Kang, Yeonah Shim, Kyunghee Yun, Junseok Lee, Yongseok Lee, and Keeho Kim "The effect of sub-layer condition on the OPC model", Proc. SPIE 6349, Photomask Technology 2006, 63494O (20 October 2006); https://doi.org/10.1117/12.686653
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Data modeling

Optical proximity correction

Statistical modeling

Critical dimension metrology

Process modeling

Lithography

Optimization (mathematics)

Back to Top