Paper
10 June 2006 The design and realization of a sort of robot vision measure system
Yong-jie Ren, Ji-gui Zhu, Xue-you Yang, Sheng-hua Ye
Author Affiliations +
Proceedings Volume 6344, Advanced Laser Technologies 2005; 63442Z (2006) https://doi.org/10.1117/12.694430
Event: Advanced Laser Technologies 2005, 2005, Tianjin, China
Abstract
The robot vision measure system based on stereovision is a very meaningful research realm within the engineering application. In this system, the industry robot is the movable carrier of the stereovision sensor, not only extending the work space of the sensor, but also reserving the characteristics of vision measure technology such as non-contact, quickness, etc. Controlling the pose of the robot in space, the stereovision sensor can arrive at the given point to collect the image signal of the given point one by one, and then obtain the 3D coordinate data after computing the image data. The method based on the technique of binocular stereovision sensor, which uses two transit instruments and one precision drone to carry out the whole calibration, is presented. At the same time, the measurement program of the robot and the computer was written in different program language. In the end, the system was tested carefully, and the feasibility was proved simultaneously.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yong-jie Ren, Ji-gui Zhu, Xue-you Yang, and Sheng-hua Ye "The design and realization of a sort of robot vision measure system", Proc. SPIE 6344, Advanced Laser Technologies 2005, 63442Z (10 June 2006); https://doi.org/10.1117/12.694430
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sensors

Calibration

Robot vision

Robotic systems

Cameras

3D modeling

Image sensors

Back to Top