Paper
13 October 2006 Study of coordinate measuring machines synthetic dynamic error under different positions and speeds based on dual linear returns
Xiushui Ma, Yetai Fei, Hongtao Wang, Zhongyang Ying, Guang Li
Author Affiliations +
Proceedings Volume 6280, Third International Symposium on Precision Mechanical Measurements; 62800P (2006) https://doi.org/10.1117/12.716177
Event: Third International Symposium on Precision Mechanical Measurements, 2006, Urumqi, China
Abstract
Modern manufacturing increasingly places a high requirement on the speed and accuracy of Coordinate Measuring Machines (CMMs). Measuring speed has become one of the key factors in evaluating the performance of CMMs. In high speed measuring, dynamic error will have a greater influence on accuracy. This paper tests the dynamic error of CMM's measuring system under different measuring positions and speeds using the dual frequency laser interferometer. Based on measured data, the modeling of synthetic dynamic errors is set up adopting the dual linear returns method. Comparing with the measured data, the relative error of modeling is between 15% to 20%, the returns equation is prominent at α=0.01 level, verified by "F". Based on the modeling of synthetic dynamic errors under different measuring positions and speeds, the measuring system dynamic error of CMMs is corrected and reduced.
© (2006) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiushui Ma, Yetai Fei, Hongtao Wang, Zhongyang Ying, and Guang Li "Study of coordinate measuring machines synthetic dynamic error under different positions and speeds based on dual linear returns", Proc. SPIE 6280, Third International Symposium on Precision Mechanical Measurements, 62800P (13 October 2006); https://doi.org/10.1117/12.716177
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Data modeling

Interferometers

Error analysis

Computing systems

Manufacturing

Control systems

Calibration

Back to Top