Characteristics of TiNi shape memory alloy processed by vacuum plasma spray

Hiroyuki Nakayama; Minoru Taya; Ronald W. Smith; Travis Nelson; Michael Yu; Edwin Rosenzweig

doi:10.1117/12.658573

6 April 2006 Characteristics of TiNi shape memory alloy processed by vacuum plasma spray

Hiroyuki Nakayama, Minoru Taya, Ronald W. Smith, Travis Nelson, Michael Yu, Edwin Rosenzweig

Author Affiliations +

Proceedings Volume 6170, Smart Structures and Materials 2006: Active Materials: Behavior and Mechanics; 61702A (2006) https://doi.org/10.1117/12.658573
Event: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2006, San Diego, California, United States

Abstract

TiNi shape memory alloy has been used in many application fields due to its excellent shape memory effect (SME) and superelasticity (SE). However, it is difficult and costly to machine TiNi alloy into complex shapes due to its low ductility. To address this problem, one approach is near-net shape processing by vacuum plasma spraying (VPS). In this study, the transformation behavior, mechanical properties and microstructure of TiNi alloy processed by VPS method are studied. The as-sprayed and homogenized TiNi alloy exhibited compositional variations in the sample, though both samples exhibited a single TiNi phase with low transformation temperatures, below 170 K Aging the homogenized sample at 773 K for 18 ks led to an increase in the transformation temperature, resulting in good transformation behavior. Specifically, DSC measurement revealed clear transformation peaks due to Martensite, austenite and R-phase transitions. Compression testing of a sample aged at 773 K for 18 ks exhibited a good SME below M_f and superelasticity (SE) above A_f. The recoverable strain due to SME and SE were more than 2.4 % and 5.0 %, respectively. TEM studies confirmed that aTi₃Ni₄ precipitate was formed by aging at 773 K for 18 ks.

Citation Download Citation

Hiroyuki Nakayama, Minoru Taya, Ronald W. Smith, Travis Nelson, Michael Yu, and Edwin Rosenzweig "Characteristics of TiNi shape memory alloy processed by vacuum plasma spray", Proc. SPIE 6170, Smart Structures and Materials 2006: Active Materials: Behavior and Mechanics, 61702A (6 April 2006); https://doi.org/10.1117/12.658573

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE