Reflow modeling for elongated contact hole shape

Ji-Eun Lee; Dai-Gyoung Kim; Kang Baek Kim; Mi-Rim Jung; Hye-Young Kang; Jong-Sun Kim; Joo-Yoo Hong; Hye-Keun Oh; Jun-Tack Park

doi:10.1117/12.656286

29 March 2006 Reflow modeling for elongated contact hole shape

Ji-Eun Lee, Dai-Gyoung Kim, Kang Baek Kim, Mi-Rim Jung, Hye-Young Kang, Jong-Sun Kim, Joo-Yoo Hong, Hye-Keun Oh, Jun-Tack Park

Author Affiliations +

Proceedings Volume 6153, Advances in Resist Technology and Processing XXIII; 61533T (2006) https://doi.org/10.1117/12.656286
Event: SPIE 31st International Symposium on Advanced Lithography, 2006, San Jose, California, United States

Abstract

Resist reflow is a simple and cost effective technique by which the resist is baked above the glass transition temperature (Tg) after the typical contact hole pattern has been exposed, baked and developed. Resist reflow method can obtain very high resolution without the loss of process margin than any other resolution enhancement techniques that can make the same linewidth. But it is difficult to predict the results of the thermal flow and the process optimization. If the results of reflow process can be exactly predicted, we can save great time and cost. In order to optimize the layout design and process parameters, we develop the resist flow model which can predict the resist reflow tendency as a function of the contact hole size, initial shape and reflow temperature for the normal and elongated contact hole. The basic fluid equation is used to express the flow of resist and the variation of viscosity and density as a function of reflow temperature and time are considered. Moreover surface tension and gravity effects are also considered. In order to build a basic algorism, we assume that the fluid is incompressible, irrotational and Newtonian. First, we consider the boundary movement of side wall and we think the basic equations for free surface flow of fluid as 2-dimensional time-dependent Navier-Stokes equations with the mass conservation equation. Surface tension acting on the interface pressure difference and gravity force that enable the resist flow are also included.

Citation Download Citation

Ji-Eun Lee, Dai-Gyoung Kim, Kang Baek Kim, Mi-Rim Jung, Hye-Young Kang, Jong-Sun Kim, Joo-Yoo Hong, Hye-Keun Oh, and Jun-Tack Park "Reflow modeling for elongated contact hole shape", Proc. SPIE 6153, Advances in Resist Technology and Processing XXIII, 61533T (29 March 2006); https://doi.org/10.1117/12.656286

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE