Validation of a soil interface model to account for apparent aberrations in capacitive soil moisture sensors

Peter Johnson; Kym Watling; David V. Thiel; Daniel A. James

doi:10.1117/12.639118

5 January 2006 Validation of a soil interface model to account for apparent aberrations in capacitive soil moisture sensors

Peter Johnson, Kym Watling, David V. Thiel, Daniel A. James

Author Affiliations +

Proceedings Volume 6035, Microelectronics: Design, Technology, and Packaging II; 60351Z (2006) https://doi.org/10.1117/12.639118
Event: Microelectronics, MEMS, and Nanotechnology, 2005, Brisbane, Australia

Abstract

In this paper the operation of capacitive soil moisture sensors are modeled using an electrical circuit analogue. This model aims to predict the response of capacitive sensors for a variety of soil types, moistures, soil conductivity and sensor operating frequencies. The model is extensively validated under a variety of conditions for a variety of sensor circuits and measurement techniques. The deposition of a conducting film composed of clay-like soil material over the sensing surface of a soil moisture sensor is shown to be the cause of hysteresis when the sensor is operated at low frequencies (10KHz). As the frequency is increased (10MHz) the effect of the conducting film becomes insignificant. Surface chemistry analysis techniques were used to identify the soil deposits on the conducting film. This research is motivated by the design of a small disposable sensor printed on a flexible plastic substrate measuring soil moisture as a function of the number of point contacts terminating on the insulated sensor electrode. In controlled conditions the sensor exhibits a linear response across most of its range to water content changes, but in some soils the reading becomes "stuck" on a high reading and does not return to a lower reading until the soil has dried considerably.

Citation Download Citation

Peter Johnson, Kym Watling, David V. Thiel, and Daniel A. James "Validation of a soil interface model to account for apparent aberrations in capacitive soil moisture sensors", Proc. SPIE 6035, Microelectronics: Design, Technology, and Packaging II, 60351Z (5 January 2006); https://doi.org/10.1117/12.639118

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
7 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Sensors

Soil science

Capacitance

Particles

Interfaces

Capacitors

Chemistry

Show All Keywords

Keywords/Phrases

Search In:

Publication Years