Paper
28 September 2005 Electric power supply sourced from within fiber optic cable
Jerzy S. Witkowski, Andrzej E. Sowa, Bogdan Paszkiewicz, Iwona Zborowska-Lindert
Author Affiliations +
Abstract
In the paper, authors present an example of a simple and cost effective system of electric power supply by means of optical fiber. In many cases of physical measurements, it is very important to avoid excessive distortion to measured quantity. One of this is measurement of electromagnetic field of radio frequency. This is of concern in both, far- and near field examination. RF field measurement can be performed by direct measurement of the field at a point of interest or by measurement of the field scattered by a dedicated probe. One of the most important properties of this method is its low influence to the field under test. The full advantage of the system can be taken when the probe can be powered and controlled be means of optical fiber.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jerzy S. Witkowski, Andrzej E. Sowa, Bogdan Paszkiewicz, and Iwona Zborowska-Lindert "Electric power supply sourced from within fiber optic cable", Proc. SPIE 5952, Optical Fibers: Applications, 595212 (28 September 2005); https://doi.org/10.1117/12.622151
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Phase only filters

Power supplies

Electromagnetism

Gallium arsenide

Optical fibers

Polymer optical fibers

Solar cells

Back to Top