Paper
18 August 2005 Construction and testing of wavefront reference sources for interferometry of ultra-precise imaging systems
Author Affiliations +
Abstract
We have built and calibrated a set of 532-nm wavelength wavefront reference sources that fill a numerical aperture of 0.3. Early data show that they have a measured departure from sphericity of less than 0.2 nm RMS (0.4 milliwaves) and a reproducibility of better than 0.05 nm rms. These devices are compact, portable, fiber-fed, and are intended as sources of measurement and reference waves in wavefront measuring interferometers used for metrology of EUVL optical elements and systems. Keys to wave front accuracy include fabrication of an 800-nm pinhole in a smooth reflecting surface as well as a calibration procedure capable of measuring axisymmetric and non-axisymmetric errors.
© (2005) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael A. Johnson, Donald W. Phillion, Gary E. Sommargren, Todd A. Decker, John S. Taylor, Yoshio Gomei, Osamu Kakuchi, and Seiji Takeuchi "Construction and testing of wavefront reference sources for interferometry of ultra-precise imaging systems", Proc. SPIE 5869, Optical Manufacturing and Testing VI, 58690P (18 August 2005); https://doi.org/10.1117/12.623185
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Wavefronts

Mirrors

Extreme ultraviolet lithography

Calibration

Silicon

Metrology

Charge-coupled devices

RELATED CONTENT

Focus and alignment using out of focus stellar images at...
Proceedings of SPIE (September 17 2010)
Megacam paving the focal plane of the MMT with...
Proceedings of SPIE (July 09 1998)
Misalignment modes in high-performance optical systems
Proceedings of SPIE (August 27 1999)
Astronomical imaging using ground-layer adaptive optics
Proceedings of SPIE (September 24 2007)

Back to Top