On-chip replication of high-sag micro-optical components fabricated by direct laser writing

Daniel Asselin; Patrice Topart; Lieyi Sheng; Felix Cayer; Sebastien Leclair; Min Wang; Hubert Jerominek

doi:10.1117/12.591719

22 January 2005 On-chip replication of high-sag micro-optical components fabricated by direct laser writing

Daniel Asselin, Patrice Topart, Lieyi Sheng, Felix Cayer, Sebastien Leclair, Min Wang, Hubert Jerominek

Author Affiliations +

Proceedings Volume 5720, Micromachining Technology for Micro-Optics and Nano-Optics III; (2005) https://doi.org/10.1117/12.591719
Event: MOEMS-MEMS Micro and Nanofabrication, 2005, San Jose, California, United States

Abstract

This paper describes the fabrication of very high-sag (up to 42 μm) microlenses by direct laser writing and their integration onto a simple microoptical bench processed by conventional microfabrication technologies pertaining to MOEMS. At the heart of such a work is INO's laser writer. It is based on a He-Cd laser operating at 442 nm whose intensity can be modulated up to 1024 levels, and on a 40 nm accuracy X-Y translation stage. Laser writing into thick photoresist layers introduces however particular problems in terms of the roughness achievable. Simulations show that the writing beam diameter, the line-to-line spacing and the translation stage accuracy contribute to some unavoidable residual roughness. By applying optimized laser writing parameters, arrays of 1 x 5 aspherical microlenses were fabricated in a thick positive photoresist, along with alignment marks concurrently generated for on-chip alignment purposes. The microlenses were successfully integrated with a microoptical bench by first generating a UV-transparent mold from the photoresist laser written master. The microlenses imprinted in the mold were then replicated in a layer of hybrid glass material cast on the microoptical bench by UV-embossing with a modified MA6 mask aligner. The uniformity of focal lengths was approximately 3% as determined from best fits of profilometric traces. The replication with alignment of this array in a hybrid glass material was demonstrated on a 12 mm x 12 mm microoptical bench chip. An alignment accuracy of less than 5 μm was obtained. The replication error was less than about 4%. The measured surface roughness was 50-60 nm RMS, in good agreement with simulation results.

Citation Download Citation

Daniel Asselin, Patrice Topart, Lieyi Sheng, Felix Cayer, Sebastien Leclair, Min Wang, and Hubert Jerominek "On-chip replication of high-sag micro-optical components fabricated by direct laser writing", Proc. SPIE 5720, Micromachining Technology for Micro-Optics and Nano-Optics III, (22 January 2005); https://doi.org/10.1117/12.591719

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE