Thermal heating effects in writing optical waveguides with 0.1 - 5 MHz repetition rate

Shane Eaton; Fumiyo Yoshino; Lawrence Shah; Alan Arai; Haibin Zhang; Stephen Ho; Peter Robert Herman

doi:10.1117/12.591058

12 April 2005 Thermal heating effects in writing optical waveguides with 0.1 - 5 MHz repetition rate

Shane Eaton, Fumiyo Yoshino, Lawrence Shah, Alan Arai, Haibin Zhang, Stephen Ho, Peter Robert Herman

Proceedings Volume 5713, Photon Processing in Microelectronics and Photonics IV; (2005) https://doi.org/10.1117/12.591058
Event: Lasers and Applications in Science and Engineering, 2005, San Jose, California, United States

Abstract

High-repetition rate (>200 kHz) ultrafast lasers drive novel heat accumulation processes attractive for rapid writing of low loss optical waveguides in transparent glasses. Heat accumulation is significant at ~1 MHz when thermal diffusion is insufficient to remove the absorbed laser energy from the focal volume (<10-μm diameter) during the interval between pulses. A novel femtosecond fiber laser system (IMRA, FCPA μJewel) providing variable repetition rate between 100 kHz and 5 MHz was applied to waveguide writing in fused silica and various borosilicate glasses in order to investigate the relationship of such heat accumulation effects. Waveguides were formed with <400-fs pulses at 1045-nm at pulse energies of 2.5 μJ at 100 kHz to >150 nJ at 5 MHz. Wide variations in waveguide properties were encountered, particularly when processing 1737F and AF45 borosilicate, at repetition rates greater than 200 kHz. Waveguide characterization revealed unique material-dependent thresholds for cumulative and single pulse phenomenon. Of these materials, fused silica is unusual in resisting waveguide formation at the fundamental wavelength of 1045 nm, but amenable to waveguide writing at the second harmonic of 522 nm. Laser processing windows are presented for several silica-based glasses for creating symmetric waveguides with low insertion loss when coupled to standard optical fibers. The effects of material and laser parameters on thermal accumulation and waveguide characteristics are discussed.

Citation Download Citation

Shane Eaton, Fumiyo Yoshino, Lawrence Shah, Alan Arai, Haibin Zhang, Stephen Ho, and Peter Robert Herman "Thermal heating effects in writing optical waveguides with 0.1 - 5 MHz repetition rate", Proc. SPIE 5713, Photon Processing in Microelectronics and Photonics IV, (12 April 2005); https://doi.org/10.1117/12.591058

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available