Paper
6 December 2004 Target detection cycle criteria when using the targeting task performance metric
Jonathan G. Hixson, Eddie L. Jacobs, Richard H. Vollmerhausen
Author Affiliations +
Proceedings Volume 5612, Electro-Optical and Infrared Systems: Technology and Applications; (2004) https://doi.org/10.1117/12.577830
Event: European Symposium on Optics and Photonics for Defence and Security, 2004, London, United Kingdom
Abstract
The US Army RDECOM CERDEC Night Vision and Electronic Sensors Directorate of the US Army (NVESD) has developed a new target acquisition metric to better predict the performance of modern electro-optical imagers. The TTP metric replaces the Johnson criteria. One problem with transitioning to the new model is that the difficulty of searching in a terrain has traditionally been quantified by an "N50." The N50 is the number of Johnson criteria cycles needed for the observer to detect the target half the time, assuming that the observer is not time limited. In order to make use of this empirical data base, a conversion must be found relating Johnson cycles for detection to TTP cycles for detection. This paper describes how that relationship is established. We have found that the relationship between Johnson and TTP is 1:2.7 for the recognition and identification tasks.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jonathan G. Hixson, Eddie L. Jacobs, and Richard H. Vollmerhausen "Target detection cycle criteria when using the targeting task performance metric", Proc. SPIE 5612, Electro-Optical and Infrared Systems: Technology and Applications, (6 December 2004); https://doi.org/10.1117/12.577830
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Targeting Task Performance metric

Target detection

Contrast transfer function

Sensors

Imaging systems

Modulation

Electro optical modeling

Back to Top