Paper
26 August 2004 Diagnostics of abnormal combustion in a SI automotive engine using in-cylinder optical combustion sensor
Dariusz Piernikarski, Jacek Hunicz
Author Affiliations +
Proceedings Volume 5566, Optical Security and Safety; (2004) https://doi.org/10.1117/12.577575
Event: Optical Security and Safety, 2003, Warsaw, Poland
Abstract
The paper presents development of a research project oriented towards application of optical sensors and optical wave-guides for the investigation and diagnostics of the combustion process in the internal-combustion automotive engine. Applied measurement method assumes usage of photometric techniques, and in particular spectrophotometry of the flames existing in the combustion chamber. Emission signal during combustion is picked up by an optical sensor with direct access to the combustion chamber, then transmitted using two parallel fiber-optic bundles. The signal can be filtered with set of interference filters and finally it is converted using grating monochromator or photodetector. The main goal of the project is to develop a laboratory diagnostic system enabling on-line identification of the abnormal combustion phenomena like knocking or misfires (lack of combustion). Extracted synthetic quality indexes will be used in the improvement of combustion process and as a feedback signals in the engine control algorithms. The paper is illustrated with some results obtained during previous experiments.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dariusz Piernikarski and Jacek Hunicz "Diagnostics of abnormal combustion in a SI automotive engine using in-cylinder optical combustion sensor", Proc. SPIE 5566, Optical Security and Safety, (26 August 2004); https://doi.org/10.1117/12.577575
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Combustion

Sensors

Signal attenuation

Diagnostics

Optical sensors

Algorithm development

Signal processing

Back to Top