Paper
12 October 2004 Development of a one-meter membrane mirror with active boundary control
Author Affiliations +
Abstract
Materials and processes have been developed for production of polymer membranes with optical quality surface characteristics. These materials have been successfully used to manufacture large, high quality, ultra lightweight, optical flats for beam splitters, lens covers and other applications. These materials can potentially be used to develop large aperture primary mirrors with areal densities less than 1kg/m2. However, for curved mirrors it is more difficult to establish and maintain desired optical figure from the initial packaged configuration. This paper describes design analysis being performed to support fabrication of a membrane mirror test article. Modeling was performed to evaluate the effectiveness of several different boundary control concepts for correcting different types of figure aberrations. Analyses of different combinations of boundary displacement actuators, electrostatic force actuators, and pressure are presented.
© (2004) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James D. Moore Jr., Brian G. Patrick, Surya Chodimella, Dan K. Marker, and Arup Maji "Development of a one-meter membrane mirror with active boundary control", Proc. SPIE 5553, Advanced Wavefront Control: Methods, Devices, and Applications II, (12 October 2004); https://doi.org/10.1117/12.558330
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Actuators

Monochromatic aberrations

Error analysis

Optics manufacturing

Spherical lenses

Control systems

RELATED CONTENT

Free form surfaces in imaging optics
Proceedings of SPIE (December 17 2014)
Stellar Imager: wavefront control
Proceedings of SPIE (July 15 2008)
Bending modes for active optics
Proceedings of SPIE (September 16 2011)

Back to Top